Clarke MIG200 S-MULTI 200A MIG/TIG/MMA Synergic Inverter Welder

BACK TO PRODUCT LIST
BACK TO PRODUCT LIST
PRODUCT NUMBER: 6015605

Product description

The Clarke MIG200 S-MULTI 200A MIG/TIG/MMA Synergic Inverter Welder is a high quality and versatile, multi-functional welder utilising the latest synergic and inverter technology to provide ease of use whilst achieving good quality welds.

Synergic is a complex and advanced technology which simplifies the welding process by taking out all of the guesswork, presented on a user-friendly and intuitive LED display. When setting the product up, the user selects which type of welding they wish to undertake, is then prompted to make a selection on type of wire and gas used and using these inputs, the intelligent Synergic technology calculates the power and wire feed speed, to produce the ideal welding parameters. The process is simple, intuitive and allows the welder to be setup up to use within seconds, saving time and effort.

Supplied with:

  • 1 x MB 25AK Torch (1.2mm tip fitted for aluminium welding
  • 1 x Electrode Holder & Lead
  • 1 x Earth Clamp & Lead
  • 1 x Chipping Hammer & Wire Brush
  • 1 x Set V Rollers V0.8/1.0mm (2pc in box)
  • 3 x Hose Clips
  • 2 x 0.8mm Tip (for MSW 0.8mm wire)
  • 2 x 1.0mm Tip (for MSW 1.0mm wire)
  • 2 x 1.0mm Tip (for aluminium wire)
  • 2 x 1.2mm Tip (for Aluminium wire)
  • 1 x Wire Liner (Spring liner for Steel/Stainless Steel)
  • 1 x Tip Changing Spanner

SPECIFICATIONS

  • Suitable for MIG, TIG & MMA Welding
  • Min/Max Output Current: 20A - 200A
  • Electrode Diameter: 1.6 - 4mm (MMA) / 1.6 - 2.4mm (TIG)
  • Input voltage: 230V/50Hz
  • Maximum Input Current (Max/Eff): 38A / 14.7A
  • Welding thickness: 1.0 - 8.0mm (Mig) 1.0 - 6.0mm (Tig) 1.0 - 6.0mm (MMA)
  • Supplied with welding mask
  • Peak Input Power: 8740W
  • Clarke TK13 (6012239), gas regulator & gas required for TIG welding
Technical specification
Product manual
PART NUMBER: 6015605

Product description

The Clarke MIG200 S-MULTI 200A MIG/TIG/MMA Synergic Inverter Welder is a high quality and versatile, multi-functional welder utilising the latest synergic and inverter technology to provide ease of use whilst achieving good quality welds.

Synergic is a complex and advanced technology which simplifies the welding process by taking out all of the guesswork, presented on a user-friendly and intuitive LED display. When setting the product up, the user selects which type of welding they wish to undertake, is then prompted to make a selection on type of wire and gas used and using these inputs, the intelligent Synergic technology calculates the power and wire feed speed, to produce the ideal welding parameters. The process is simple, intuitive and allows the welder to be setup up to use within seconds, saving time and effort.

Supplied with:

  • 1 x MB 25AK Torch (1.2mm tip fitted for aluminium welding
  • 1 x Electrode Holder & Lead
  • 1 x Earth Clamp & Lead
  • 1 x Chipping Hammer & Wire Brush
  • 1 x Set V Rollers V0.8/1.0mm (2pc in box)
  • 3 x Hose Clips
  • 2 x 0.8mm Tip (for MSW 0.8mm wire)
  • 2 x 1.0mm Tip (for MSW 1.0mm wire)
  • 2 x 1.0mm Tip (for aluminium wire)
  • 2 x 1.2mm Tip (for Aluminium wire)
  • 1 x Wire Liner (Spring liner for Steel/Stainless Steel)
  • 1 x Tip Changing Spanner

OTHER PRODUCTS IN THIS RANGE

Technical specification

Min/Max Amps
20 - 200A
Power Supply
Must be Hardwired
Volts
230
Mild Steel Capability
8mm
No Gas/Gas
Gas
Welding Wire Sizes
0.8 - 1.2mm
Packaged Weight
22.25kg
Please note that details and specifications contained herein, are correct at the time of publishing. We reserve the right to change specifications at any time without prior notice.

We use cookies to analyse and personalise your experience on our website and to help improve its performance.

To learn more about how we use cookies, please see in our cookie policy.